HOW TO FIT OUR NUMBER PLATES

You will need a drill with a 6mm drill bit and either our car or bike number plate fixing kit or alternatively the sticky pad kit if you don't want to use screws.

FITTING USING THE CAR NUMBER PLATE FIXING KIT:

Carefully remove your old plate from the vehicle and use it as a template to drill the holes into your new plate. This is easiest done by placing your old plate on top of new one and lining them up perfectly to drill the holes.

Make sure the surface where you choose to fit the new plate is clean and completely free of dirt/grease etc before fixing.

Fix your new plate to the vehicle using the screws provided and ensure it is tightly fitted and secure with the caps placed over the screws.

FITTING USING BIKE FIXING KIT:

Carefully remove your old plate from your motorbike and use it as a template to drill the holes into your new plate. This is easiest done by placing your old plate on top of new one and lining them up perfectly to drill the holes.

Fix your new plate to the bike using the plastic bolts provided and ensure it is tightly fitted and secure.

Thankyou for purchasing your new plates from www.a1showplates.com